落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高工作电流小工作电流校正仪(耐电孤校正仪)-(算机操作)

High voltage low current tester (arc resistance tester) - (computer control)

类产商品英文名称称:耐电弧试验机

Product name: electric arc resistance tester

企业产品型号:NDH-A

Product model: NDH - A

能够满足标准单位:GB/T 1411-2002《胶体绝缘层建筑材料耐高放低电压电流脉冲释放的耐压试验》(一样IEC  61621-1997)及ASTM D495等标淮的规定设计生产的,并符合国家IEC 149、UL 746A等耐压工艺

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要的采用区域及作用:

本实验室检测机是都按照应用到电机马达、电商和家廷用电量商等制造业的低压电工用塑胶、光敏树脂胶胶和隔热电阻漆等隔热电阻资料的耐焊弧效果评估,主用到固态隔热电阻资料如:塑胶、复合膜、光敏树脂胶、矿石、瓷砖、玻璃窗、隔热电阻油、隔热电阻漆、厚纸板等导电介质的耐焊弧效果测验;

本检验机由求算机控住运转,能够表现现在科学试验的情况及科学试验时段,科学试验完后并存储现在科学试验数值,并可复印.准则检测上报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为左右一起空间结构,下部分为方法控制系统,上端为实验设计箱。

2 本物料适用*新自动化调控技巧,利用首选流程(IEC或ASTM)可电脑自动做校正,并在计算机上显示信息试验检测时和最终。

3 **功效好的,抗干拢技能强,试验的精密性强。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断的时间精度:需小于 ±10ms

2 调压器储电量:2kVA

3 固定做实验的时候电阻:12.5kV

4 检验输出功率gps精度:±3%

5 感应电流调整高精准度:±10%  电流值自动测量可靠性强,精密度:1.5%

6 参比电极对试件重压:(0.5±0.05)N

7 参比电极素材:钨棒

8 电极片长度:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 采用条件高温:(23±2)℃

10 采用生态对温度湿度的:(50±5)%

11 供电:220V±5%  50Hz  10A

12 实验设计    形式:   国家行业标准/美标/10 mA 累计/20 mA 间隔/30 mA持续/40 mA连继

13 疲劳试验源程序如下所示:

小程序段

弧光电流大小

mA

电孤通断时间间隔s

各环节段持续性时光s

疲劳试验总周期s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

持续通

60

240

5

20

陆续通

60

300

6

30

多次通

60

360

7

40

联续通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序号顺序

称谓

需求量

备注栏

01

耐焊弧检验仪

一种

 

02

电极材料整体

1套

 

03

电级支架

买套

 

04

电源适配器通信电缆

两套

 

05

一定接地放**

一支队伍

 

06

电流量毫安表

一个

 

07

PC电脑测控电脑软件

买套

 

08

岩样架

两支

 

09

电极材料离标准单位块

2块

 

10

多角度标准的块

2块

 

11

陶瓷厂家片

2片

 

12

喷墨复印机机

1台

加盟品牌

13

确定机

1台

牌子

14

施用讲解书

1份

 

15

达标率证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 产品设备参数:

NDH-A    耐电弧放电试验台仪-微机保持

NDH-B    耐脉冲测试仪-摸屏掌控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪